The Chim-Scan® Series 100 Camera System
Scroll down for details and Pricing 

We have financing available

Scroll down for Pricing

The Series 100 is designed with the controller inside the lid and reeler mounted on the back of the case. This unit was designed for working in smaller spaces and weighs 10lbs.
The Controller has:

• ​7” high-resolution LCD screen
• Controls to operate a variety of cameras
• 120V wall plug operation and Drill Battery Adaptor
• Can use 18v or 20v DeWalt or Milwaukee drill batteries.
• Built-in SD card recorder unit
  • comes with a 4GB card
    • can use up to a 32Gb card but we strongly recommend nothing over 8GB.
  • Built-in time/date stamp on all images and video
  • Jpeg imagery or up to 1hr video segments
  • Built-in mic for videos
  • The SD record uses an IR remote, allows you to be 2 to 3 ft away from the recorder and still record pictures or video. You will need to make sure you have a clear line of sight, or the remote will not work. 
    • Can use the EZ Share® cards (4GB and 8GB are the best) to transmit images and video to your mobile devices. (Available thru Amazon® and other retailers)
      • 2022 update – these cards are hard to find and can be expensive. If you find one stay away from any over 8GB, we have nothing but issues when testing.
• The Case
  • The unit is housed in plastic waterproof case.
  • The Reeler with 50ft cable provides power and signal to the camera while pulling the cable from the reeler​, it is mounted on the back of the case.

 

 The SD recorder is controlled by a remote to allow you to move away from the unit if needed and still take photos or video. Simply press the "play" button to take digital stills, or the "OK" to start a video, and "stop" to stop the recording. For playback, press the menu and select the playback mode.

---

Back of Series 100 - showing the reeler.

The Reeler shown on the back of the unit works like a fishing reel. As you pull on the cable, it rolls out while the scan is in process without signal loss. When the scan is done, reel the cable back onto the reeler, ready for the next job. 
The feet on the case stabilize the unit while scanning.

---

Lighthouse Tilt	Lighthouse Tilt Combo
3,400.00	3,950.00
per unit	per unit
See Details	See Details
Details are listed on Package page	Details are listed on Package page

Don't want the SD Recorder or the above are above your budget - Click here

Where can a Chim-Scan® be used:

• Masonry fireplace flues
• Prefabricated fireplace chimney
• Gas vents
• B-vents
• Oil flues
• Cat 1 gas furnace and heat exchanges
• Wall cavities
• Chimney chase inspections
• Crawl space/Attic areas too low to get into.
• Dryer vents
• Range hoods/vent

We have financing available​

Optional Accessories listed below

Blowfish	Kwik-Lock Rods	USB Keyboard
150	36 to $486.00	295.00
per unit	Induvial Rod to Rod Kit	Internal Component plus Keyboard
Go to Page	More Options	Go to Page
For stabilization in flues over 18x18	If you have Rod's already, tell us and we'll put the compatible rod adaptor on the camera.	​Allows you to put text on the screen, which can be captured in a photo or video. See why $295 page for more info.

  If you are in need of rods, check out our Kwick-Lock® rods


                                                         Prices are subject to change without notice.

​* A New unit is considered the Case (with Controller and Reeler) and the Camera. The free ground shipping may be applied to other items in the same order but is not guaranteed.  ​