J3D Camera
|
|
The J3D Camera was custom designed right here in the Heartland and 3-D printed in our shop. Since we designed the parts, we ensured this chimney inspection camera is rugged, durable and dependable. Use it to take images and videos at zero degrees (straight up/down), tilted 45 degrees up or down, or for 90 degree side views. Since it is a one piece camera, it is 6" shorter than the Lighthouse Combo Camera. The top camera is not removable.
|
Custom designed and 3-D printed right here in the Heartland!
|
|
|
The J3D Camera merges the features of the Lighthouse Tilt and Utility Camera into one tough, heavy-duty 3-D printed chimney camera. This new camera is great for smaller work areas and features a one-piece design.
- The top Utility Camera provides that straight up or down view
- The Tilt portion of the camera provides a joint or side wall view.
- The J3D has a 90° tilt range providing a 5 to 10” inches of vertical view, depending on the liner’s size. It tilts continuously or can stop at any point. Now you can tilt and rotate simultaneously, and the camera is still 2” inches round.
- Six inches shorter than the Lighthouse Combo Camera - great for small areas
- Lightweight yet durable
- A switch on the controller allows you to flip back and forth between views/cameras while scanning.
- If you're recording video, the image will switch back and forth without stopping the recording.
- This camera has a set of 2 stabilizers to space it from the chimney walls.
- Use this camera to scan masonry and prefab chimneys and will fit through a thimble.
- The J3D can be used to scan prefabs or masonry flues.
- Designed and created in our lab in the Heartland
- The camera includes one rod adaptor. Customer must specify Kwik-Lock, Ro-Vac, Snaplock or Torque Fit.
Since the top Utility Camera is no longer removable for scanning small, hard-to-reach areas, consider purchasing a Utility Camera with flexible wired Gooseneck Rod.
Flexible Gooseneck Rod and Utility Camera $750. Compatible with 211 or 100 Controller Units.
Flexible Gooseneck Rod and Utility Camera $750. Compatible with 211 or 100 Controller Units.
The White whiskers with balls on the end are meant for Masonry Flues and can handle flues up to 13x13. But you can cut the stick to fit in smaller flues but we suggest you use the orange ones.
If you deal with Larger flues -( 18x18, 20x24, etc), let us know when ordering and we'll make you a custom set.
If you deal with Larger flues -( 18x18, 20x24, etc), let us know when ordering and we'll make you a custom set.
The Orange whiskers are meant for Smaller Masonry and Prefab/Metal flues. They are also adjustable, but their maximum effectiveness ends at 8".
|
|
This video was filmed for a customer and we're sharing it now so others can benefit.
|