Chim-Scan® Basic Units
Our Chim-Scan® Basic Units include the same features as our standard units minus the SD recorder. ​Use your phone and Screen Shooter or tablet to capture images and videos of defects such as cracked flues, moisture, damaged mortar joints and more. The SD recorder can be added later.

Chim-Scan® Series 211 Controller with 10" monitor, reeler, heavy case and drill battery adapter.

Chim-Scan® Series 100 Controller with 9" monitor, reeler, case and drill battery adapter.

J3D Camera shown with Wheels and Whiskers. Wheels are used for thimbles or severe offsets. The J3D has a total of 30 bright LED lights! 9 LED lights above and 9 below the camera and 12 LED lights circling the lens of the top camera.

The Mini-Enviro Camera is small and lightweight at 1.45" x 1.8" long. It is a high-definition camera with nine bright LED lights!

The Lighthouse™ Tilt Camera provides high-definitions images and videos. Operational controls include tilt, continuous 360-degree rotation and 18 bright adjustable LED lights.

The Screen Shooter attaches to the front of the controller/monitor and provides a holder for your cell phone. Click on the image above for more information and to view pricing (also below).

We Have Payment Plans Available.

​Series 211 - Lighthouse Tilt	Series 211 - J3D	Series 211 - Mini-Enviro
$3,650.00 per unit	$4,000.00 per unit	$2,650 per unit
​NO SD RECORDER	​NO SD RECORDER	NO SD RECORDER

The Series 211 is designed with the controller and reeler housed inside a custom hardy road case.
The Controller which is in the lid of the case features:

•  ​10” high-resolution LCD screen
• Controls to operate a variety of cameras.
• 120V wall plug operation and Drill Battery Adaptor
  • Can use 18v or 20v Bosch, DeWalt, Milwaukee, Rigid, Makita, Kobalt and Ryobi drill batteries (MUST SPECIFY brand when ordering, as the adaptors are brand specific.)
  • MUST SPECIFY brand when ordering, as the adaptors are brand specific.

NO SD CARD READER!
Since the Basic Units don't include and SD Recorder, we suggest you view the information on our Screen Shooter.
The Controller can be sent back for repair or upgrade by undoing the grips on either side of the case.
The Case

• The unit is housed in an approx. 15" x 13" x 9.5" protective lined case. 
  • The Reeler provides power and signal to the camera while pulling the cable from the reeler.​
  • 50’ of cable is attached to a reeler inside the case.
  • The Reeler has four bolts that attach it to the bottom outside of the case. It can be easily removed from the case and sent back for repair or upgrade without sending the entire case, thus reducing freight charges.
• ​Extra Stabilizers for the camera can be left in the case.
• Never leave anything on the reeler when closing the case as it can damage the controller.
• Stabilizers are built-in into the cameras. 
  Cameras include 1 Rod Adaptor. Customers must specify when ordering Kwik-Lock, Ro-Vac, or SnapLok.​

​Series 100 - Lighthouse Tilt	Series 100 - J3D	Series 100 - Mini-Enviro
$2,900.00 per unit	$3,450.00 per unit	$2,095 per unit
​NO SD RECORDER	​NO SD RECORDER	NO SD RECORDER

The Series 100 is designed with the controller inside the lid and reeler mounted on the back of the case. This unit was designed for working in smaller spaces and weighs 10 lbs.
​The Controller which is located in the lid of the case features:

• ​7” high-resolution LCD screen
• Controls to operate a variety of cameras
• 120V wall plug operation and Drill Battery Adaptor
  • For drill battery adaptor you can use 18v or 20v Bosch, DeWalt, Milwaukee, Rigid, Makita, Kobalt and Ryobi drill batteries (MUST SPECIFY brand when ordering, as the adaptors are brand specific
    • ​MUST SPECIFY brand when ordering, as the adaptors are brand specific.

​​NO SD CARD READER!
Since the Basic Units don't include and SD Recorder, we suggest you view the information on our Screen-ShooterScreen Shooter.

• The Case
  • The unit is housed in plastic waterproof case.
  • The Reeler with 50ft cable provides power and signal to the camera while pulling the cable from the reeler​, it is mounted on the back of the case.  

Stabilizers are built-in into the cameras. 
Camera includes 1 Rod Adaptor. Customers must specify when ordering Kwik-Lock, Ro-Vac, or SnapLok.

Optional Accessories listed below

USB Keyboard	Kwik-Lock Rods	Screen Shooter for 211 Unit	Screen Shooter for 100 Unit
295.00	36 to $486.00	125	150
​Internal Component plus Keyboard	Induvial Rod to Rod Kit	211 Screen Shooter	100 Screen Shooter
Go to Page	More Options	GO TO PAGE	GO TO PAGE
​Allows you to put text on the screen, which can be captured in a photo or video. See why $295 page for more info.	If you have Rod's already, tell us and we'll put the compatible rod adaptor on the camera.	The Screen Shooter includes a case bracket.	​The Screen Shooter includes a case bracket.

         Prices are subject to change without notice.