Combo Camera - Spring Variation - Upgrade to a New J3D! - Combo Camera - Stick Variation
Upgrade to a J3D Camera!
We take either of these older cameras, break them down into its fundamental parts, throw in some new parts, reassemble, and Poof - You've got a New J3D Camera.
Bonuses of the J3D
- Whisker holders for both the Orange and the White whiskers are built into the top and bottom. (Orange and wheels shown in picture.)
- It has removable wheels for those nasty offsets and thimbles.
- There is a spring on the end of the camera to help it navigate through fireplace dampers, offsets and thimbles. The spring is also removable, but we don't suggest that.
Side Note: New J3D cameras include the tilt feature unless specified. But updated/upgraded J3D's won't have tilt feature unless we have the unit the camera goes with. The reason for this is the tilt feature won't work without the tilt switch. If you have an older unit with a tilt switch, it may be wired for the old AFT camera which won't work for the newer cameras. IF you have a question about this, please ask.
Add Tilt Feature to either of these Combo Cameras
This feature can be added to any lighthouse camera even if it's not being updated to the J3D design. In order to do this upgrade, we will need the whole unit. We need the unit/controller to install the tilt switch and to test your camera once it's done.
The Options listed here are cheaper than buying a new camera or new unit. We strive to recycle and reuse everything we can from camera being upgraded. Anything that cannot be reused or will not last, is disassembled and recycled. When upgrading a unit or camera, our goal is to get you to a place where you have the best we can offer without the cost of brand new. We will tell you if your equipment is worth updating or if it is better to go with new.
To fill out a repair/upgrade request, please CLICK HERE.
We take either of these older cameras, break them down into its fundamental parts, throw in some new parts, reassemble, and Poof - You've got a New J3D Camera.
Bonuses of the J3D
- Whisker holders for both the Orange and the White whiskers are built into the top and bottom. (Orange and wheels shown in picture.)
- It has removable wheels for those nasty offsets and thimbles.
- There is a spring on the end of the camera to help it navigate through fireplace dampers, offsets and thimbles. The spring is also removable, but we don't suggest that.
Side Note: New J3D cameras include the tilt feature unless specified. But updated/upgraded J3D's won't have tilt feature unless we have the unit the camera goes with. The reason for this is the tilt feature won't work without the tilt switch. If you have an older unit with a tilt switch, it may be wired for the old AFT camera which won't work for the newer cameras. IF you have a question about this, please ask.
Add Tilt Feature to either of these Combo Cameras
This feature can be added to any lighthouse camera even if it's not being updated to the J3D design. In order to do this upgrade, we will need the whole unit. We need the unit/controller to install the tilt switch and to test your camera once it's done.
The Options listed here are cheaper than buying a new camera or new unit. We strive to recycle and reuse everything we can from camera being upgraded. Anything that cannot be reused or will not last, is disassembled and recycled. When upgrading a unit or camera, our goal is to get you to a place where you have the best we can offer without the cost of brand new. We will tell you if your equipment is worth updating or if it is better to go with new.
To fill out a repair/upgrade request, please CLICK HERE.