top of page
  • Facebook
  • X
  • Email
  • Youtube

FREE SHIPPING ON ALL USA* ORDERS!

Chim-scan header flag.png
chimscan-logo.png

Step-by-Step Setup Guide for Your Chim-Scan® Inspection System

Whether it’s your first time unpacking a Chim-Scan® or you just need a refresher, this guide will walk you through the initial setup so you can start inspecting with confidence — and without frustration.


Step 1: Unbox & Inspect Your Equipment

Before powering anything on, make sure you have everything:

  • Camera head

  • Monitor or display unit

  • Control box (if applicable)

  • Reel or cable system

  • Power cords and chargers

  • User manual and quick-start sheet

Pro Tip: Double-check your camera lens and cable connections for dust or debris from shipping.

Step 2: Connect the Core Components

  1. Connect the camera head to the control box or reel.

  2. Plug the video output into the monitor.

  3. Connect the power source (battery or AC adapter).


If you’re using a USB or SD card system, insert your storage before powering up.

Step 3: Power It Up & Check Your Feed

Once everything’s connected:

  • Turn on the system.

  • Make sure the video feed is live and clear.

  • Test camera movement (if you have tilt/pan capabilities).

  • Adjust lighting levels for visibility.

If your image is blurry, gently clean the camera lens with a microfiber cloth.

Step 4: Test Recording (If Applicable)

If your unit has video/photo recording:

  • Test-capture a still image.

  • Record a 5-second clip to ensure the feed is saving properly.

  • Confirm the file shows up on your USB or SD card.


Label your card for easy future access (e.g., “Client - Smith Inspection”).

Step 5: Safety Check

Before entering a chimney:

  • Ensure all connections are secure.

  • Make sure there are no kinks in the cable.

  • Do a quick test of cable retraction or rotation.

  • Check your battery level (if not using AC).


Important: Never insert the camera into a flue that hasn’t cooled down.

Optional: Customize Settings

Some units allow for:

  • Brightness adjustment

  • Angle calibration

  • Output display settings

  • Audio input for voice memos (on select models)

Adjust these before you head to the job site.


You’re Ready to Inspect

That’s it. Simple, smooth, and set up for success.


Still stuck? The Chim-Scan® team is just a call or message away. Or visit the Help Center to watch setup videos, download manuals, and browse FAQs.

Comments

bottom of page