Becoming a Chim-Scan® Factory-Trained Technician is a unique factory training program. It starts with our Chimney Scanning and inspection Guide. You can take the test once you feel confident that you know the information. You will receive a patch, certificate, and the Chim-Scan® Factory-Trained designation upon passing. 
 There are many benefits of becoming a Chim-Scan® Factory Trained Technician: 
• You may be able to get lower insurance coverage rates. Ask your agent about this.
• You receive a certificate, a patch, and the number upon passing. 
• You receive a copy of our Chim-Scan® Technician Logo for advertising. 
• This book is packed with great information: 

•  There are over 400 pictures in the book.
• The book explains Levels of Inspection and Access Points
• When to refer to IRC and NFPA 211
• Angles of imagery
• Probable cause
• The Four Pathways
• Five modules featuring multiple installation types

1. Masonry fireplace
2. Masonry fireplace with an appliance - insert or hearth stove
3. Masonry thimble chimney with a solid or liquid fuel appliance(s)
4. Prefab fireplace & chimney
5. Prefab chimney with a solid fuel or liquid fuel appliance(s)

The open-book multiple-choice test is based on this guide, the Chim-Scan® Manual, and knowledge of the Chim-Scan® System. Each question is worth one point. Since this is an open-book test, 85% of correct answers are passing scores. 
You can take the test online. Once you finish the test (100 questions) and press the Submit Button, you will receive your pass/fail at that time. Your Certificate of Completion is ready to print directly off the site. You can take it up to two times before you incur an additional charge. 
Here is the breakdown of the test and manual cost: 
The training Manual is $200 in print form, including the test for one person (there is a retest fee if the test needs retaking more than twice). If you order your book(s) before 1/31/2025, you will only pay ($87 + $15.50 shipping.) 
For each test, it is only $50 for each individual from the same company. For information on taking the 
test, scan the QR code below, visit our website at www.chimscanfactorytraining.com, or give us a call to order at 641-472-7643. 

When to use IRC and NFPA 211 for Chimney Inspections
Both the International Residential Code (IRC) and the National Fire Protection Association (NFPA) 211 books provide information on building chimneys, fireplaces, and appliance installations. Which book should I use for chimney inspections? The IRC and NFPA 211 both cover new construction of chimneys, fireplaces, and appliance installations. However, NFPA 211 goes one step further, offering a process for inspecting chimneys, fireplaces, and appliance installations since we see the world of chimneys and fireplaces after operating. The question above is commonly debated within the chimney industry.
Are you wondering which to follow for new construction? Most states require the use of IRC, and a few require NFPA 211. Some states have their own building codes and some areas within a state have their own codes. Then there are exceptions such as historical areas. Always check locally because there may be additional local codes required above and beyond IRC or NFPA and even state codes.
When it comes to prefabricated chimney and fireplaces, the installation instructions must be used. These instructions can usually be obtained online if you know the model number. The same goes for appliances. If you need to call the manufacturer’s help desk for technical assistance, be sure to also have the serial number. The manufacturer (and their installation instructions) must be followed for installation and supersede IRC and NFPA 211.
We suggest obtaining an IRC or NFPA 211 book if you don't already own one. If your area abides by IRC for new construction, you will still need NFPA 211 for access and inspections. Additionally, you may need copies of local codes and historical district codes. As a chimney technician or inspector, it's up to you to determine if the chimney, fireplace, and appliance installations are operational-ready based on inspection criteria. Your customers count on it.

​©2024 Estoban Corporation LLC.