Lighthouse Tilt Combo

The Lighthouse Tilt Combo Camera or Tilt Combo Camera is made up of the Lighthouse and Utility Camera.

• The Utility attaches to the top of the Lighthouse Tilt to give you that straight up view
• The Lighthouse Tilt gives you a joint or wall view.
• A switch on the controller allows you to flip back and forth between views/cameras while scanning.
• If you're recording video, the image will switch back and forth without stopping the recording.
• This camera has a set of 3 stabilizers to keep it off chimney walls
• Each camera can still be used separately.
  • The Utility can scan Dryer vents, Ash dumps, or voids in the smoke shelf without being attached to the Lighthouse.
  • The Lighthouse Tilt can be used to scan prefabs or masonry without the Utility.

​But I already own a Lighthouse or Combo camera - Can I update??
YES, Current Lighthouse owners can upgrade their 'old' Lighthouses to Tilt or Tilt Combos. Both require that the entire unit comes back to our shop so we can install the new hardware. For Pricing - check out the Upgrades Page

​The White whiskers with balls on the end are meant for Masonry Flues and can handle flues up to 13x13. But you can cut the stick to fit in smaller flues but we suggest you use the orange ones.
If you deal with Larger flues -( 18x18, 20x24, etc), let us know when ordering and we'll make you a custom set.

The Orange whiskers are meant for Smaller Masonry and Prefab/Metal flues. They are also adjustable, but their maximum effectiveness ends at 8". 

This video makes the rotation and tilting appear jumpy. In real life, the movement is smooth.