Series 211 with J3D Camera
Price: $4,500.00

Don't want the SD Recorder or the above are above your budget - Click here

The Series 211Controller:

• ​ ​10” high-resolution LCD screen
• Controls to operate a variety of cameras
• 120V wall plug operation and Drill Battery Adaptor
  • Can use 18v or 20v DeWalt or Milwaukee drill batteries.
• Built-in SD card recorder unit - This is standard, if you want to use your phone - Here
  • comes with a 4GB card​
  • Built-in time/date stamp on all images and video
  • Jpeg imagery or up to 1hr video segments
    • Built-in mic for videos
  • The SD record uses an IR remote,
    • allows ​you to be 2 to 3 ft away from the recorder and still record pictures or video. You will need to make sure you have a clear line of sight, or the remote will not work. 
  • You can use any SD reader with the SD card, so if you work with a tablet in the field all you need to get is a SD reader that plugs into your tablet or phone.
    • iPads will recognize the jpeg photos but not the ASF video files. ​
      • ​ASF video files are recognized by Apple computers with VLC, PC computer, and Google Drive.  
• The Controller can also be sent back for repair or upgrade but undoing the grips on either side of the case.
• The Case
  • The unit is housed in an approx. 15" x 13" x 6" protective lined case 
  • The Reeler provides power and signal to the camera while pulling the cable from the reeler​
    • 50’ cable attached to a reeler inside the case.
    •  The Reeler is fleeted. This allows for it to be removed from the case and sent back for repair or upgrade without sending the entire unit case, thus reducing freight charges.
  • ​Extra Stabilizers for the camera can be left in the case
  • Never leave anything on the reeler when closing the case as it can damage the controller.​

J3D  View Camera

• The J3D Camera comprises the Lighthouse Tilt and Top Camera and gives you the best of both views.
• The Top Camera is embedded in the top of the Lighthouse Tilt to give you that straight-up view, while the Lighthouse Tilt gives you the joint/sidewall view.
• The controller has a switch so you can flip back and forth between views while scanning. If you're recording video, you can switch between cameras without stopping the recording.
• The Lighthouse Tilt has a 90° tilt range providing a 5 to 10" inches of vertical view, depending on the liner's size. It tilts continuously or can be stopped at any point.
  Now you can tilt and rotate simultaneously, and the camera is still 2" inches round.
• The J3D Camera comes with a set of removal wheels for navigating thimbles up to 16" deep and for chimneys with severe offsets.
• The wheels are removable, so the camera will fit into Prefabs and 'normal' masonry chimneys.
• Stabilizers are built-in into the top and bottom of the camera. 
  
• Will include 1 rod adaptor. Customers must specify Kwik-Lock, Ro-Vac, Snap-lock OR Torque Fit.
  
  
  • For More information on the J3D Camera, please go to its page.