Series 211 Package 4 System: Chim-Scan Controller, Chim-Scan Case, Lighthouse Tilt Camera
The Chim-Scan Controller is designed to use any Chim-Scan camera specified Controller includes 10” screen , variable light control, fuses, indicator lights,10 pin camera output cable, and power cord.
SD Recorder - the SD recorder is mounted inside the controller and can record photos and videos. Photos and videos are date/time stamped and can be previewed on the monitor before leaving the job site. Records 60 min video with the built-in microphone. Includes 2G SD card, may use up to 32G card. The SD record uses an IR remote, which allows you to be 2 to 3 ft away from the recorder and still record pictures or video. You will need to make sure you have a clear line of sight, or the remote will not work. Also, you can not record photos while recording a video.
The unit is housed in an approx. 15" x 13" x 6" protective lined case Cable Reeler: Provides power and signal to the camera while pulling the cable from the reeler; it comes with a 50’ camera cable.
The Lighthouse Tilt has a 90° tilt range providing a 5 to 10” inches of vertical view, depending on the liner’s size. It tilts continuously or can stop at any point—this addition to the original lighthouse camera. Now you can tilt and rotate simultaneously, and the camera is still 2” inches round.
Will include 1 rod adaptor. Customers must specify Kwik-Lock, Ro-Vac OR Torque Fit.
1643 Old Hwy 34 Fairfield, IA52556 Office phone#641-472-7643 Email: Info@chimscan.net